The advantage is that it reduces the back and forth movement across the floor.ġ9.

(OPTIONAL) Another option is to start a row and work in the next several rows (3-4) simultaneously before finishing that row. For installing the last row of tile close to the wall, use the angle pullbar tool by anchoring in on the outer edge of tile and tapping on the inside with the rubber mallet.ġ8. TIP: To assist short-side alignment, bridge the two pieces with a full piece on the long-side of the following row. Repeat this method for the remaining tiles in the second row. Make sure the tapping block lip sits on the edge of the tile and not the click profile to prevent damage to the profile. If needed, apply pressure with foot or knee to keep the two tiles level and in the same plane. Hold the next tile close to the previous tile on the short side and angle in on the long side first and push down.ġ6. Push downwards and make sure the tiles are clicked together correctly. Angle the tongue on the long side into the groove of the first row. Start the second row by cutting a piece in half or to 33% or 66% of its original length to get a staggered pattern. Make sure all pieces are flush on the groove side or the next row.ġ5. Lightly tap with a rubber mallet and tapping block if needed. Complete the entire first row by repeating this step. Align the adjacent piece on the short side and click it by angling in the tongue of second tile into the groove of the first tile and then push it down. Lay the first tile along the corner with the tongue side facing the wall. Spacers should be used along the entire perimeter to ensure uniform 1/4 inch gap.ġ4. Use spacers to leave a 1/4 inch expansion gap at the starting corner. Begin with the two tongue sides facing the two walls in the corner.ġ3. If the remainder is 3 inches or less, cut down the width of the first row to allow the last row to be more than 3 inches.ġ1. Measure the width of the room and divide by the width of the tile. Inspect your RevoTiles individually prior to installation for visible defects.ġ0.

How to install rapelay